The biggest difference between Krones blowing machineSidel blowing machine where?
发布时间：2019-01-09 浏览次数：
German Kranz Company has successfully developed a bottle blowing machine which can produce OPP bottles. Based on the Kranz two-step bottle blowing technology, the machine can achieve the same speed as PET bottle blowing. The blowing speed of each cavity per hour can reach 1500 bottles. If the heating structure of the preform heating station of the bottle blower is slightly improved, the speed can be further increased. The conventional Krans bottle blower now used to blow PET bottles can also blow OPP bottles at the same speed.
Sidel, the giant of PET bottle blow moulding machine manufacturing company, upholds its consistent innovative spirit and continuously promotes high-quality equipment for the PET bottle packaging industry. The SBO excellent moulding series model launched by Sidel in 2005 is a good example.
The SBO UniversalTM series of excellent plastics machines includes 6 models with 6 to 20 cavity numbers and the output rate is 10,000 to 36,000 bottles/h. Compared with SBO Series 2, this series reduces the cost of blowing PET bottles.
SBO 16 UniversalTM, the first equipment in the SBO UniversalTM plastic series, was sold to Amcor, Blythewood, South Carolina, USA, which owns the world's largest PET bottle manufacturer and produces up to 2 billion PET bottles annually for the beverage market. Since January 1, 2005, the equipment has been continuously producing PET bottles for carbonated beverages for 24 hours a day, 7 days a week. In such a long workload, SBO 16 UniversalTM excellent plastic body showed excellent performance. Because the bottle blank feeder has been redesigned and the whole process has been controlled continuously and strictly, the productivity of this rotary blow moulding machine has been upgraded to a higher level. The machine can realize the output rate of 1800 bottles/h per die and 28800 bottles/h per machine.
Amcor Company evaluates SBO UniversalTM plastics machine in this way: its design is very reasonable, its efficiency and availability are good, and the maintenance of the plan is reduced; it has advanced control system, which greatly prolongs the normal running time; and its energy consumption is also low.
To meet the market demand for small equipment with high cost performance, Sidel launched SBO 4 CompactTM bottle blowing machine at Drinktec World Beverage and Liquid Food Technology Exposition in 2005. Its design output rate is below 7000 bottles/h. It can be connected with small filling machine. It is a new generation of entry-level products of SBO excellent plastic series.
T he design of this equipment applies the principle of linear dynamics to make it have linear structure. Compared with high output rotary equipment, the linear structure makes its components simpler and the fuselage more compact. It is said that in the case of more than four die cavities, due to some restrictions related to mechanical and technological factors, rotary equipment is still preferred. SBO 4 CompactTM faithfully embodies the concept of SBO equipment. Like other SBO equipments, the pure mechanical design is adopted in the main control part, which ensures the performance and reliability of the equipments. Forward transmission under bottleneck represents a major innovation of linear equipment. The transmission mode of rotary SBO equipment reduces the number of interfaces and increases the reliability of the linear equipment, and does not need to touch the preform and the bottle body, thus ensuring higher packaging quality.
In addition, the equipment also has some characteristics of the latest generation of excellent plastic series bottle blowers. Because of the elaborate design of the heating and blowing modules, even at high production rates, the blowing packaging bottles can meet strict technical requirements. In addition, the equipment also reduces energy consumption as well as excellent plastic series, which can bring obvious economic benefits to users.
Based on the linear structure, the key functional components of the equipment are designed as independent and easy-to-remove modules to facilitate maintenance. In particular, it is worth mentioning that the bottle blowing unit is positioned in front of the body, so that the equipment has a high degree of flexibility. Like other excellent plastic series equipment, SBO 4 CompactTM also has Universal ShellTM moulds that can be quickly replaced, and most custom components are interoperable.
In order to speed up the installation and commissioning cycle, the equipment was designed to be able to be transported in containers and installed in place with forklift trucks. Because all the modules of the equipment are in the rigid frame and all the components are factory preset, including the guide rollers, the field assembly of the equipment is simple and easy without any wiring.
SBO 4 CompactTM has reached the performance level of excellent plastics series. Its single-mode productivity is as high as 1600 bottles/h, and the overall utilization rate of the machine can be guaranteed at about 95%. Because it integrates the "best blowing process" developed by Sidel's professional technology, it also meets the high quality standards of Sidel's packaging bottles, and its waste rate is less than 0.2%.
Sidel, the giant of PET bottle blow moulding machine manufacturing company, upholds its consistent innovative spirit and continuously promotes high-quality equipment for the PET bottle packaging industry. The SBO excellent moulding series model launched by Sidel in 2005 is a good example.
The SBO UniversalTM series of excellent plastics machines includes 6 models with 6 to 20 cavity numbers and the output rate is 10,000 to 36,000 bottles/h. Compared with SBO Series 2, this series reduces the cost of blowing PET bottles.
SBO 16 UniversalTM, the first equipment in the SBO UniversalTM plastic series, was sold to Amcor, Blythewood, South Carolina, USA, which owns the world's largest PET bottle manufacturer and produces up to 2 billion PET bottles annually for the beverage market. Since January 1, 2005, the equipment has been continuously producing PET bottles for carbonated beverages for 24 hours a day, 7 days a week. In such a long workload, SBO 16 UniversalTM excellent plastic body showed excellent performance. Because the bottle blank feeder has been redesigned and the whole process has been controlled continuously and strictly, the productivity of this rotary blow moulding machine has been upgraded to a higher level. The machine can realize the output rate of 1800 bottles/h per die and 28800 bottles/h per machine.
Amcor Company evaluates SBO UniversalTM plastics machine in this way: its design is very reasonable, its efficiency and availability are good, and the maintenance of the plan is reduced; it has advanced control system, which greatly prolongs the normal running time; and its energy consumption is also low.
To meet the market demand for small equipment with high cost performance, Sidel launched SBO 4 CompactTM bottle blowing machine at Drinktec World Beverage and Liquid Food Technology Exposition in 2005. Its design output rate is below 7000 bottles/h. It can be connected with small filling machine. It is a new generation of entry-level products of SBO excellent plastic series.
T he design of this equipment applies the principle of linear dynamics to make it have linear structure. Compared with high output rotary equipment, the linear structure makes its components simpler and the fuselage more compact. It is said that in the case of more than four die cavities, due to some restrictions related to mechanical and technological factors, rotary equipment is still preferred. SBO 4 CompactTM faithfully embodies the concept of SBO equipment. Like other SBO equipments, the pure mechanical design is adopted in the main control part, which ensures the performance and reliability of the equipments. Forward transmission under bottleneck represents a major innovation of linear equipment. The transmission mode of rotary SBO equipment reduces the number of interfaces and increases the reliability of the linear equipment, and does not need to touch the preform and the bottle body, thus ensuring higher packaging quality.
In addition, the equipment also has some characteristics of the latest generation of excellent plastic series bottle blowers. Because of the elaborate design of the heating and blowing modules, even at high production rates, the blowing packaging bottles can meet strict technical requirements. In addition, the equipment also reduces energy consumption as well as excellent plastic series, which can bring obvious economic benefits to users.
Based on the linear structure, the key functional components of the equipment are designed as independent and easy-to-remove modules to facilitate maintenance. In particular, it is worth mentioning that the bottle blowing unit is positioned in front of the body, so that the equipment has a high degree of flexibility. Like other excellent plastic series equipment, SBO 4 CompactTM also has Universal ShellTM moulds that can be quickly replaced, and most custom components are interoperable.
In order to speed up the installation and commissioning cycle, the equipment was designed to be able to be transported in containers and installed in place with forklift trucks. Because all the modules of the equipment are in the rigid frame and all the components are factory preset, including the guide rollers, the field assembly of the equipment is simple and easy without any wiring.
SBO 4 CompactTM has reached the performance level of excellent plastics series. Its single-mode productivity is as high as 1600 bottles/h, and the overall utilization rate of the machine can be guaranteed at about 95%. Because it integrates the "best blowing process" developed by Sidel's professional technology, it also meets the high quality standards of Sidel's packaging bottles, and its waste rate is less than 0.2%.
